FAQs

There's a leak out by the street. Who is responsible for it?: Any leak found from the meter box towards the street (the water main) falls under the responsibility of the City. The customer is responsible for any leaks (and the water lost) from the point where the meter attaches to their line and moves forward towards the house. The city is only responsible for leak repairs from the meter towards the water main. Check to see where the leak is located, and then dial customer service at 954-602-4357, or fill out a customer service form for assistance, if the leak appears to be the city’s responsibility.
Customer Service Form (PDF)

▼
Utilities

1. How are the water rates determined?: Water rates are set to cover the cost of acquiring, treating and delivering water to your tap and are adjusted annually based on the increase in costs within the region. This way, large rate increases are avoided, and the city is able to ensure that quality water is provided to you and approximately 35,000 other customers. Rates also cover the costs of scheduled replacement of aging water & sewer lines and the addition of new treatment facilities.

2. How can I lower my water bill?: Click Here to learn more about what you can do to lower your water bill.

3. Why does sewer service cost more than water service?: Just as water rates must cover the cost of operating and maintaining the water system, sewer charges must cover the same costs relating to the sewer system. Before we release treated waste water into the environment, we must comply with state and federal laws regarding the removal of pollutants and harmful chemicals by extensive treatment. Ongoing expansion and refurbishment of the waste water system is necessary to ensure that all state and federal mandates are met and to protect the environment.

4. Is my meter accurate?: All meters used by the City of Miramar must meet the accuracy test guidelines of the national American Water Works Association (AWWA), and have a manufacturer’s warranty. In addition, meters used for reading water usually under-register as they age. If you believe your meter is inaccurate, you may request a bench check. This test checks the water meter in a workshop rather than under field conditions. Service at no time is interrupted. When tested, if the meter is accurate under the AWWA guidelines there will be a $40.00 charge, billed to your utility account; if the meter is inaccurate or if the test is mandated by the City, then there is no charge for testing.

5. There's a leak out by the street. Who is responsible for it?: Any leak found from the meter box towards the street (the water main) falls under the responsibility of the City. The customer is responsible for any leaks (and the water lost) from the point where the meter attaches to their line and moves forward towards the house. The city is only responsible for leak repairs from the meter towards the water main. Check to see where the leak is located, and then dial customer service at 954-602-4357, or fill out a customer service form for assistance, if the leak appears to be the city’s responsibility.
Customer Service Form (PDF)